Is that a long way of saying, you could be absolutely right, and maybe the 20 minutes I spent setting them exactly at.002' with a dial micrometer was the best solution. So I carefully adjusted them just level with the bed which helped a lot. Use a surface planer or jointer to create a. Max planing width: 254 mm - Range of cutting depth: from 0 up to 120 mm. (Another thing that I am not accustomed to whereas my Craftsman had a rubber coated roller) So when I saw the groove created by the infeed roller, I assumed erroneusly that the bed rollers were part of the problem so I right away adjusted them below bed level as someone had suggested, and then that was even worse. Fox genuine spare parts for replacing or repairing Planer e Thicknesser F22-564/250. I had adjusted the roller height according to the manual, but then not being accustomed to a planer with bed rollers I lifted the board and that caused it to catch on the rear wall of the front roller and then the infeed roller with nasty teeth did a number on the board. As you have found that raising the board on in and out feed, that would suggest that the pressure on those items are out, and it's causing the board to raise up into the cutter head.
0 kommentar(er)
